Bristol Sound Systems Ltd

Home Contact us About us Audio Technica Monacor-Stageline R C F TOA Power amplifiers Mixer/Amplifiers Headphone amplifiers Loop Equipment Processors Mixers Record - Play 19" Rack Cabs etc Microphones Radio Mics Microphone stands Portable P A Speakers Speaker Stands & accessories Wall Brackets etc Speaker accessories Loud hailers D I Boxes Controls switch boxes Cables connectors Misc P A Discontinued Used Items Power supplies Chargers Stylus


Up-dated  28th  February 2018


Telephone  077 14 24 54 09

RETURNS

In the rare event that something has to be returned we allow 30 days from receipt of the purchased item for the purchaser to contact us before returning. Where possible new items will be replaced not repaired if faulty within 28 days. Items returned which are not faulty or returned as not wanted/wrongly ordered will be charged a 20% restocking fee. Items must be returned in the condition as dispatched with all original packing. Goods must be returned insured and carriage paid at the buyers expense. Used items are not normally accepted for return except if faulty on delivery. Consumables such as Styli, batteries etc will not be accepted for return


Description  PDA500/2 Available from stock

Maximum Square Room Coverage

Maximum 2:1 Aspect Ratio Coverage  

Inputs


Indicators  

Controls


Output Type

Loop Connector

Recommended Loop Impedance   


Loop Drive Current @ 1Ω  

Peak Loop Drive Current  

Headphones  


Performance  Frequency response:


Metal Compensation  



Dimensions  

Weight  

Weight (Net)

Weight (Gross)

Description PDA200/2

Maximum Square Room Coverage  

Maximum 2:1 Aspect Ratio Coverage

Inputs


Indicators

Controls  


Output Type

Loop Connector

Recommended Loop Impedance


Loop Drive Current @ 1Ω

Peak Loop Drive Current

Headphones  


Performance  Frequency response:


Metal Compensation  




Dimensions  

Weight  

Weight (Net)

Weight (Gross)

Description  PDA1000/2   Normally available to order with short delivery time  


Maximum Square Room Coverage  

Maximum 2:1 Aspect Ratio Coverage

Inputs


Indicators

Controls  


Output Type

Loop Connector  

Recommended Loop Impedance  


Loop Drive Current @ 1Ω

Peak Loop Drive Current

Headphones

Performance  Frequency response:


Metal Compensation  



Dimensions  

Weight  

Weight (Net)  

Weight (Gross)  


Description  PDA102S

Rated supply voltage and frequency  

Retated power consumption  

Maximum RMS Input current  

Maximum peak output current

Maximum RMS Load voltage  

Maximum area of a square loop

Recommended loop conductor size  

Recommended number of turns  

Frequency response

Input signal level  



Input impedance  

Microphone phantom power  

Signal to noise ratio

ACC Ratio  

Amplifier mode

Controls & indicator labels/functions  


Special features


Connections  Mains:



Loop Amplifier Dimensions :  

Weight (Net)  

Weight (Gross)  

VAT

Supply and installation of loop equipment to Church’s and registered charities is VAT exempt under the supply of aids to charities for use by the hearing impaired



Available from stock

200m²

240m²

1kHz  2 x XLR (one Mic, one Mic/Line) and one Outreach

connector

Loop drive meter, compression (high/low), power on

3 x input level controls, loop drive, metal compensation,

on/off switch

Current mode

Four-way binding posts

0.5 ~ 1Ω @ 1kHz. Will drive higher impedance loops

with reduced area of coverage

6A

8 Amps @ 1Ω, 13 Amps @ 0.5Ω

3.5mm jack socket allows monitoring of the loop signal

via >32Ω headphones

20Hz ~ 14kHz ±3dB; Distortion - less than 0.5%,

S/N ratio; Better than -65dB any input

True 3dB/octave design counteracts frequency dependent

absorption by metal in the proximity of the installation

over a bandwidth of approx. 100Hz ~ 10kHz

380(W) x 80(H) x 220(D) mm

3.74kg

3.74kg

6.17kg

    

500m²

600m²

1kHz  2 x XLR (one Mic, one Mic/Line) and one

Outreach connector

Loop drive meter, compression (high/low), power on

3 x input level controls, loop drive, metal compensation,

on/off switch

Current mode

Four-way binding posts

0.5 ~ 1Ω @ 1kHz. Will drive higher impedance loops

with reduced area of coverage

6A

12 Amps @ 1Ω, 19 Amps @ 0.5Ω

3.5mm jack socket allows monitoring of the loop signal

via >32Ω headphones

20Hz ~ 14kHz ±3dB; Distortion - less than 0.5%,

S/N ratio; Better than -65dB any input

True 3dB/octave design counteracts frequency dependent

absorption by metal in the proximity of the installation

over a bandwidth of approx. 100Hz ~ 10kHz

380(W) x 80(H) x 220(D) mm

3.46kg

3.46kg

5.71kg

     

900m²

1100m²

1kHz  2 x XLR (one Mic, one Mic/Line) and one

Outreach connector

Loop drive meter, compression (high/low), power on

3 x input level controls, loop drive, metal compensation,

on/off switch

Current mode

Four-way binding posts

0.5 ~ 1Ω @ 1kHz. Will drive higher impedance loops

with reduced area of coverage 6A

14 Amps @ 1Ω, 24 Amps @ 0.5Ω

3.5mm jack socket allows monitoring of the loop signal

via >32Ω headphones

20Hz ~ 14kHz ±3dB; Distortion - less than 0.5%,

S/N ratio; Better than -65dB any input

True 3dB/octave design counteracts frequency dependent

absorption by metal in the proximity of the installation

over a bandwidth of approx. 100Hz ~ 10kHz

380(W) x 80(H) x 220(D) mm

4.54kg

4.54kg

7.49kg

Wall mounting

induction loop amplifier 120m²

£155.00 Excl VAT  (£186.00 incl)

Available from stock

 

Mains voltage :  

Fuses :  

Bandwidth :  

Input dynamic range :  

Distortion :  


LED indicators :  

User controls :






Dimensions :

Weight (Net)  

Weight (Gross)


230v AC  

Internal mains input fuse 1A 20mm (HRC)  

40Hz ~ 8kHz  

36dB  

The PDA200E includes an amplitude compression stage that

limits overload and has a dynamically variable ratio from 1:1 to 10:1  

Input peak (limit), output drive (1.2.3 peak current), power on (power)  

One level control, adjustable between -35dB to +0dB for both line and

microphone :

One output drive control, giving a loop current adjustable between

40mA & 2.1A : One mid-range cut & boost tone control :

(frequency = 1kHz, cut = 1  

273(W) x 200(H) x 77(D) mm  

2.90kg

4.79kg


AVX PDA 102S complete 16m sqare loop kit


£105.00 Excl VAT  (126.00 incl)

Normally available to order with short delivery time


     

230v AC @ 50/60Hz

20W

2.1A

2.8A

5.5v

16m² (4m x 4m)

0.5mm² @ 35 metres to

1

-3dB  120Hv ~ 5kHz as per IEC 60118-4

Mic: 50dBV Unbalanced; Outreach: 10dBV balanced

(referenced to full output 1kHz sine wave into 1Ω load

with controls at max).

Mic: 1kΩ; Outreach: 20kΩ

9v DC

-62dB

2:1

True Current Mode

Green Power LED, Red Limit LED, Red Peak LED, Limited control,

Drive Control

Outreach plate connector allowing the connection of up 10

outreach plates

IEC Socket 230v 20W; Loop Output: 2 Way Push Terminal;

Outreach: 4 Way Plugable screw terminal; Microphone:

3.5mm mono jack socket

136(W) x 56(H) x 175(D) mm  

1.25kg

2.10kg

AVX DL50K complete 16m squre loop kit

£145.35 Excl VAT   (£172.42 incl)

Normally available to order with short delivery time

Outreach plates for use with the above loop amplifiers


Normally available to order with short delivery time

The DL50/K System features everything you need to create a high quality, stand-alone induction loop system for small room applications.

APXM        

SigNET - XLR Mic Level Plate


  £32.50 Excl VAT  (£39.00 incl)


     

APM

SigNET - Omni-directional Microphone on a Plate


         

 £32.50 Excl VAT  (£39.00 incl)

APXL           

SigNET - XLR Line Level Plate


£32.50  Excl VAT  (£39.00 incl)


APJ

SigNET - 3.5mm Jack Plate


  £32.50 Excl VAT  (£39.00 incl)

APA-APL    

DUAL PHONO LINE LEVEL PLATE


£32.50 Excl VAT  (£39.00 incl)

APL     

SigNET - Line Level Input Plate


£32.50 Excl VAT  (£39.00 incl)

APA-LLO     

LOW LEVEL OUTPUT PLATE

The APA/LLO* is a low level output plate and is intended to facilitate the connection of individual hearing assistance systems to the Soundfield system. The plate is supplied with a 3.5mm 2pole jack socket with an output level of 775volts nominal, set by means of a user adjustable level control. Cable requirements are as Outreach input plates, but a separate cable must be provided where this facility is installed.

£32.50 Excl VAT  (£39.00 incl)


            

Free standing, Plugtop mains lead supplied

16m² approx

1kHz  2 x 3.5mm microphone sockets; 1 x dual phono (line) socket : 1 x alert

Input Level; loop current meter; power on

Input level, loop drive, tone, microphone priority

DL50 amplifier, plug-top power supply, 33m of loop cable.

SCART-to-double-phono lead. AMT microphone, 'AFILS fitted' sticker

185(W) x 40(H) x 85(D) mm

0.60kg

Description  DL50/K  

Type  

Coverage

Inputs

Indicators  

Controls  

Kit Content


Dimensions

Weight (Gross)

SigNET - Portable Induction Loop System Covers 1.2m²

With more than 10% of the population suffering from some kind of hearing impairment the PL1 is the ideal portable device to ensure that your environment meets the standards laid out by the DDA

AVX PL1/K1 portable loop systems 1.2 sqare mtrs

 £145.25 Excl VAT

Normally available to order with short delivery time

(£174.30 incl)



Description  PL1/K1

Type  

Coverage

Inputs  

Indicators

Controls






Dimensions

Weight (Net)

Weight (Gross)g

       

Portable

1.2m² approx.

2 x mic (one built-in mic and one 3.5mm remote mic socket for AMT or AMD mics)

Power on, input level,

charging required,

charging in progress,

audio warning of

imminent shutdown

On/Off button,

adjust auto-shut off timer

250(W) x 100(H) x 300(D) mm

1.70kg

2.81kg

SigNET - Counter Induction Loop Kit

The ML1/K counter induction loop amplifier is ideal for use in post offices,  banks, building societies and ticket offices, etc

AVX ML1/K counter loop system     

£75.00 Excl VAT  (£90.00 incl)

Normally available to order with short delivery time





       

Wall mounting (requires fixed mains wiring and a 25mm back box)

1.2m² approx.

1kHz  1 x 3.5mm remote mic. socket; 1 x Line/Outreach socket

Input level, Power On, Loop Drive Meter

On/Off button, adjust auto shut-off timer

Ml1 amplifier, AMT microphone, TX2 pre-formed counter loop, 'AFILS fitted' sticker

143(W) x 83(H) x 32(D) mm

0.3kg (amplifier only)

0.30kg

0.50kg


Description  ML1/K

Type  

Coverage

Inputs

Indicators  

Controls  

Kit Content

Dimensions

Weight  

Weight (Net)

Weight (Gross)


Adastra loop receiver & headset

This item would be supplied with a set of headphones

 Free of Charge


£38.30 Excl VAT  (£45.96 incl)

Available from stock

Adastra Induction Loop Receiver (with belt clip)  Code: 952.854

 

Power supply  

Controls  

Connection  

Headphone impedance  

Dimensions

Weight  

This item would be dispatched by Hermes.

Express delivery available see ‘Contact Us’ page



This item would be dispatched by Hermes.

Express delivery available see ‘Contact Us’ page



This item would be dispatched by Hermes.

Express delivery available see ‘Contact Us’ page


This item would be dispatched by Hermes.

Express delivery available see ‘Contact Us’ page


9Vdc (PP3 battery included)

Volume, lo-cut switch

3.5mm headphone jack

32 Ohms nominal

104 x 59 x 31mm

78g

952-854


    AVX PDA 200/2         AVX PDA 500/2        AVX PDA 1000/2

        £224.00 Excl VAT             £318.30 Excl VAT              £363.56 Excl VAT

           (£268.80 incl)                              (£381.96 incl)                               (£436.27 incl)

                           

                                                                                              



Free-standing Induction Loop Amplifier  

Covers 500m²

Free-standing Induction Loop Amplifier  

Covers 900m²       

 Free-standing Induction Loop Amplifier    

Covers 200m²