TOA - Trantec

Bristol Sound Systems Ltd

Hand Tie clip Clip mic accesories Headsets Flexible neck Boundary Paging Phantom/pre-amps

RETURNS

In the rare event that something has to be returned we allow 30 days from receipt of the purchased item for the purchaser to contact us before returning. Where possible new items will be replaced not repaired if faulty within 28 days. Items returned which are not faulty or returned as not wanted/wrongly ordered will be charged a 20% restocking fee. Items must be returned in the condition as dispatched with all original packing. Goods must be returned insured and carriage paid at the buyers expense. Used items are not normally accepted for return except if faulty on delivery. Consumables such as Styli, batteries etc will not be accepted for return

TOA WH4000S Windscreens for headset microphones

The WH-4000S is a replacement windscreen set used exclusively for the Headset Microphone. It contains 10 pieces of windscreens. For use with WH4000A and WH4000H

TOA WH-4000H headset microphone

The TOA WH4000H is headset microphone with a cardioid pattern, featuring a lightweight design.

As the WM4000A but not equipped with an adjustable band to fix the headset onto the head.

Specifications

Type

Directivity

Sensitivity

Maximum input level

Cord length

Terminal

Finish

Weight

Electret condenser

Unidirectional

-66 dB + 3 dB

120 dB SPL

1.3 m (4.27’)

3.5mm (0.14”)

Adjustable band EVA, black

Frame, stainless black (silicon rubber)

Gooseneck, chrome plated Black (shrink tube)

50g of 1.6oz (cable included)

TOA WH4000A Headset microphone for transmitters

The TOA WH4000A ia headset microphone with a cardioid pattern, featuring a lightweight design.

The WM4000A is equipped with an adjustable band to fix the headset onto the head.

Type

Directivity

Sensitivity

Maximum input level

Cord length

Terminal

Finish

Weight

Electret condenser

Unidirectional

-66 dB + 3 dB

120 dB SPL

1.3 m (4.27’)

3.5mm (0.14”)

Frame, stainless black (silicon rubber)

Gooseneck, chrome plated Black (shrink tube)

50g of 1.6oz (cable included)

The HCM03, omniderectional condenser capsule headset microphone, is ideal when minimum visibility is required. With 3.5mm jack to fit TOA transmitters (and other)

Proel HCM03SE Headset microphone with 3.5 jack.

To fit TOA transmitters

This microphone is adapted to order

back electret condenser

5 mm(0.197inch )

20Hz-20Kz

-42db (+- 3db)

130 dB

20 dB-A

2000Ω

20 mAmp

0.023 kg(0.051lb )

pcs.1

Transducer type:

Diaphragm Diameter:

Frequency response:

Sensitivity:

Maximum SPL for 1% THD:

Self Noise:

Reccommended Load Impedance :

Current drain:

Weight:

Master pack:

Trantec MIC SJ66 Headset microphone

The MIC-SJ66 is a headworn microphone with a Mini Jack Connector for use with the S04 and S4.10 Series Beltpacks. The MIC-SJ66 has been designed primarily with the sports and aerobics industry in mind and is therefore built to withstand the everyday rigours of an active lifestyle.

The construction of this headband microphone offers a high degree of protection against the ingress of sweat. Precise placement is obtained with the 4mm diameter flexible gooseneck, and the condenser capsule is highly efficient at noise cancellation – helping prevent feedback or interference from crowd noise etc.

This slim-line Aerobic Headset is available in a choice of the following colours: Black, Blue & Yellow.

Trantec MIC SJ33 Headset microphone

The MIC-SJ33 is a head worn microphone with a Mini Jack Connector for use with the S4.04 and S4.10 Series Beltpacks. This microphone has been designed primarily for the active professional who need hands free operation.

Supplied with foam windshield.

Specfications

Type

Nominal Impedance

Max SPL

Operating Voltage

Current Consumption

Frequency Response

Cable Length

Colours Available